In Pakistan, bed sizes are not fully standardised — a “king size” from one workshop may differ by 6–12 inches from another’s. Knowing the actual dimensions before you order saves you from a bed that doesn’t fit your room or your mattress. This guide covers real-world Pakistani bed dimensions, which size suits which room, and what to look for in the frame.
What Are the Standard Bed Sizes in Pakistan?
| Bed Type | Pakistani Dimensions (W × L) | Best for |
|---|---|---|
| Single / Cot | 3 ft × 6.5 ft (36″ × 78″) | Children’s rooms, guest rooms |
| Mini Queen | 4 ft × 6.5 ft (48″ × 78″) | Smaller master bedrooms (10×10 ft) |
| Queen | 5 ft × 6.5 ft (60″ × 78″) | Standard master bedrooms (12×12 ft+) |
| King | 6 ft × 6.5 ft (72″ × 78″) | Large master bedrooms (14×14 ft+) |
| Super King | 7 ft × 7 ft (84″ × 84″) | Premium suites, very large rooms |
Important: These are bed frame outer dimensions. The sleeping surface (mattress) is typically 2–4 inches narrower and shorter than the frame. Always confirm mattress dimensions with your supplier before ordering a frame.
King Size vs Queen Size — What’s Actually the Difference?
The practical difference is one foot of width — 6 ft (king) vs 5 ft (queen).
- A queen at 5 ft gives a couple approximately 30 inches each. Fits in a 12×12 ft bedroom with space for bedside tables and a walking lane.
- A king at 6 ft gives each person 36 inches — noticeably more room. Requires a minimum 13×14 ft bedroom to avoid feeling cramped.
- A super king (7 ft) is primarily a statement piece. Requires a 16×16 ft or larger bedroom to look proportionate.
What Is a Mini-Queen Bed and When Should You Choose It?
The mini-queen (4 ft wide, 6.5 ft long) is a Pakistani-market size that doesn’t exist in Western catalogues. It’s narrower than a queen but wider than a single.
Choose a mini-queen when:
- Your bedroom is 10×10 ft to 11×12 ft
- You need room for a wardrobe on one side and a dressing table on the other
- The room is for one person but a single cot feels too small
Note: Mini-queen mattresses are not as widely available. Order mattress and frame together, or confirm your supplier stocks 4 ft widths.
How to Measure Your Bedroom Before Ordering a Bed
- Room width and length: Measure wall to wall at floor level. Note where the door swings.
- Walking clearance: Leave at least 2 feet (ideally 2.5 ft) on each open side of the bed.
- Wardrobe clearance: Ensure wardrobe doors can open fully without hitting the bed frame or footboard.
What Should a Quality Bed Frame Have?
- Frame: Heavy-duty hardwood with corner blocks at every joint.
- Centre support: Any bed 5 ft wide or larger needs a centre support leg that reaches the floor.
- Slats or base: Wooden slats spaced no more than 3 inches apart. Avoid thin MDF board under the mattress.
- Headboard fixing: The headboard must bolt to the frame — floating headboards are a quality shortcut.
How Much Does a King Size Bed Cost in Islamabad?
At Ikon Home GT, custom king size bed sets start from PKR 120,000 with matching bedside tables. Every bed is built to your dimensions, fabric, and storage configuration. We deliver and install across Islamabad, Rawalpindi, and nationwide.
Visit our showroom at AlGhani Arcade, Sector A, DHA Phase II, Islamabad, or WhatsApp us at +92 320 5514232.
Published by Ikon Home GT — June 2026 | ikonhomegt.com
Related Guides
